2024 Chevrolet Silverado 6500 Crew Cab DRW 4WD, Palfinger PAL Pro 39 Mechanics Body (Stock #N3212)
Chassis Details
Vehicle Options
- Lamps, rear, stop/turn/backup (1-piece assembly) with license plate light
- Front suspension, 7,500 lb. (3,402 kg) multi-leaf, includes shock absorbers
- Visors, driver and front passenger, vinyl
- Seat trim, Vinyl
- Grille guard screen, insect protection (mounted behind grille)
- Emissions, 50 state certification
- Horn, single-note
- Headlamps, halogen projector-beam
- Seat Belt, Black
- Trailer brake controller, integrated
- Seat, rear 60/40 folding bench (folds up), 3-passenger (includes child seat top tether anchor)
- Antenna, fixed mast
- Windows, power with driver express up and down and express down on all other windows
- Spare tire delete (STD)
- Transmission shift control calibration, fuel sense Performance
- Wheel, spare delete
- Door handles, Black
- Engine, Duramax 6.6L Turbo-Diesel V8, B20-Diesel compatible 350 hp @ 2700 rpm, 750 lb.-ft. torque @ 1400 rpm (STD)
- Speedometer, miles/kilometers
- Interior trim, Jet Black/Dark Ash (Required and only available with (H2Q/H2R) Dark Ash seats with Jet Black interior accents.)
- Cruise control, steering wheel-mounted
- Brakes, hydraulic, heavy duty Bosch/Meritor/Wabco system with 4-channel (ABS) (Includes (J69) driveline park brake.)
- Axle, Open rear axle, non-locking rear
- Capped Fuel Fill
- Door locks, power
- Instrumentation, 6-gauge cluster featuring speedometer, fuel level, engine temperature, tachometer, voltage and oil pressure
- Air conditioning, single-zone
- Steering, power (Bosch S2 8014 Plus)
- Fuel tank, rear only, 40 gallon mounted between frame side rails and behind rear axle
- Emissions, USA 50 State certified
- Axle to End of Frame, 49" (Requires wheelbase (EM1) 199" or (FNV) 175". Not available with (G40), (GP1) or (GP8) rear air suspension.)
- Incomplete vehicle
- Rear Vision Camera, display integrated into Radio (Shipped loose in cab for upfitter installation.)
- Assist handle, front passenger and driver on A-pillars
- Fuel, diesel B20
- SiriusXM, delete
- Floor covering, Graphite-colored rubberized-vinyl
- Axle lubricant, rear, synthetic oil EmGard FE -75W-90
- OnStar, delete
- Steering wheel, urethane
- Front fender extension, painted body color
- Daytime Running Lamps, with automatic exterior lamp control
- Upfitter switch kit provides up to 4-30 amp circuits to facilitate installation of aftermarket electrical accessories located on the instrument panel
- Airbag deactivation switch, frontal passenger-side (Included and only available with (AY0) airbags.)
- Trailering provisions, trailering wire harness only, trailer combined (Stop/Tail/Turn) connection socket and harness mounted at rear of frame.
- Lamps, cargo area, cab mounted with switch on center switch bank
- 6-speaker audio system
- Steering column, manual Tilt-Wheel
- Rear axle, 4.30 ratio Max road speed: 75 MPH
- Front axle, 7,500 lb., Dana Spicer 60-256, single-reduction, front driving
- StabiliTrak, Electronic Stability Control System with Traction Control includes Electronic Trailer Sway Control and Hill Start Assist
- Driver Information Center, 3.5-inch diagonal monochromatic display, provides warning messages and basic vehicle information (Included and only available with (IO3) Audio System with 4.2" diagonal color display or (IOR) Chevrolet Infotainment System with 7" diagonal color touch-screen.)
- Mirror, inside rearview manual day/night
- Neutral-at-Stop Automatic transmission shifts to neutral when the service brake is depressed while the vehicle is at a complete stop, and remains in neutral until the service brake is released
- Assist steps
- Brake, parking, driveline park brake system
- Axle lubricant, front, synthetic oil EmGard FE-75W-90
- Exhaust brake
- Four wheel drive
- Traction control
- Airbags, Single-stage frontal airbags for driver and front outboard passenger; Seat-mounted side-impact airbags for driver and front outboard passenger; Head-curtain airbags for front and rear outboard seating positions; (Always use seat belts and child restraints. Children are safer when properly secured in a rear seat in the appropriate child restraint. See the Owner's Manual for more information.)
- Lamps, Smoked Amber roof marker
- Batteries, heavy-duty dual 1300 cold-cranking amps
- Additional fuel, 5 gallons
- Fog lamps, front, halogen
- Paint, solid
- Engine block heater
- Tires, rear 225/70R19.5G traction blackwall Goodyear
- DPF, diesel particulate filter, manual regeneration
- Air Dryer, heated
- Wheels, 19.5" x 6.75", steel, Grey painted, 8-holes, hub piloted
- Seat adjuster, driver 10-way power
- Glass, deep-tinted
- Front stabilizer bar
- Work Truck Preferred Equipment Group
- Engine, Duramax 6.6L Turbo-Diesel V8, B20-Diesel compatible
- Dark Ash seats with Jet Black interior accents, Vinyl seat trim
- Backup alarm
- Back-up alarm calibration
- Grille, chrome
- Battery, top post threaded, battery jump start stud
- Power outlet, 110-volt AC
- Axle, limited slip, Dana Spicer Truetrac, torque proportioning limited slip
- Air Compressor Accessory Drive
- Shock Absorbers, rear
- 30,000 lb. GCWR (13,607 kg)
- Bumper, front chrome
- Seats, front 40/20/40 split-bench, cloth or vinyl 3-passenger.
- Provision for cab roof-mounted lamp/beacon
- Rugged Duty Service Transmission, Automatic close-ratio 6 SPD with double overdrive, Allison, A2750RDS
- Remote Keyless Entry
- Tires, front 225/70R19.5G traction blackwall Goodyear
- Exhaust system, rear exit
- Rear suspension, 15,500 lb. (7,031 kg) multi-leaf, vari-rate
- Rear axle, 4.30 ratio
- Auxiliary harness, 3' for headlamps and turn signals
- Mirrors, outside heated power-adjustable vertical trailering, upper glass, manual-folding and extending, black.
- Snow Plow Prep Package
- Rear axle, 15,500 lb. (7,031 kg), Dana Spicer S16-140, single reduction
- Summit White
- 6500 HD Series
- Electrical Provisions, rear of frame, upfitter, body builder wiring
- Paint Scheme, Style 1
- GVWR, 22,500 lb. (10,206 kg)
- Spare tire delete
- Wheelbase, 199" (505.5 cm), 84" CA
- Skid Plate, steel, frame-mounted, protects the transfer case from the ground
- Power Take Off, engine control provisions
- Alternator, 220 amps
- Recovery hooks, front, frame-mounted, black
- Single-slot CD/MP3 player
- CHEVROLET INFOTAINMENT SYSTEM 7" DIAGONAL COLOR TOUCHSCREEN VOICE RECOGNITION BLUETOOTH AUDIO STREAMING APPLE CARPLAY & ANDROID AUTO CAPABLE, IN-VEHICLE APPS CAPABLE
- FRONT FENDER EXTENSION, PAINTED BODY COLOR
- 50-STATE EMISSIONS
- View All
Body Details
PAL Pro 39 Features
The PAL Pro 39 is our new weight-optimized generation of bodies available in 9' and 11' configurations. In this development, we discovered new ways to reduce weight to create the lightest steel crane body in the industry without sacrificing durability.
Features:
Featuring new light-weight aluminum doors, the PAL Pro 39 offers you a more usable payload and reduced corrosion. Choose from various standard options to meet your service truck needs, including a headache rack, accessory mounting brackets, tail shelf and bumper options, and more.
PAL Pro 39 is manufactured using 12-gauge A-60 galvanneal steel and features a full-length torsion box understructure interlaced with tubular cross members. Combined with integrated outrigger housings, PAL Pro 39 effectively manages crane forces while preventing flexing and cracking.
PAL Pro 39 features a 39,000 ft. lbs. crane reinforcement designed to accommodate PALFINGER PSC 3216, 4016, 4025, 5025, and 6025 service cranes.
PAL Pro 39 is designed to be the lightest steel crane body in the industry without sacrificing durability. The body can be mounted on a dual wheel chassis with a GVWR as low as 14,001 lbs., providing excellent flexibility for a wide range of applications. Threaded weldment options available from the factory make installing top mounted accessories easy. Boom rest, welder, compressor, EnPak, Air-n-Arc and AirPak mounts eliminate the need to drill holes in the body.
PAL Pro 39 features light-weight aluminum double panel doors that provide rigid performance with internal C-channel stiffeners adhered with structural adhesive. Interior compartments feature aluminum hinges and divider trays that are light-weight and corrosion resistant.
Interior compartments on the PAL Pro 39 are coated with Zolatone to resist damage commonly caused by tools, chains, and parts. Zolatone provides an additional layer of rust protection and as an added bonus, the coating is white in color and helps to brighten up the interior.
PAL Pro 39 features either a 12" or 21" deep work bench bumper designed to provide technicians with a useable work surface for field repairs, welding, and more. Each bumper features a 1/4" steel top plate and the 21" bumper adds a thru-compartment for internal storage of long tools and chains. All PAL Pro 39 bumpers come standard with a 2" receiver tube hitch rated to 16,000 lbs. towing capacity.
Standard Features:
- 44" Standard Compartment Heights with Raised Compartment Options
- 9' and 11' Standard Configurations
- Treadplate Cargo Floor, Load Space Walls and Compartment Tops
- Hybrid Torsion Box and Ladder Frame
- Palfinger Engineered Internal Gussets Prevents Body Cracking
- Full Length Channel Drip Rails
- Double Panel Doors with Internal C-channel Stiffeners, Adhered with Structural Adhesive
- Non-marring Boom Rest
- Workbench Featuring 12" or 21" Bumper, Receiver Hitch, 1/4" Steel Top Plate and Thru Compartment
- Linear Adjustable Front Mounts
- Aluminium Doors and Hinges
- Rubber Mounted LED Lights
- E-coat Primer
MPG estimates on this website are EPA estimates; your actual mileage may vary. For used vehicles, MPG estimates are EPA estimates for the vehicle when it was new. The EPA periodically modifies its MPG calculation methodology; all MPG estimates are based on the methodology in effect when the vehicles were new (please see the Fuel Economy portion of the EPAs website for details, including a MPG recalculation tool).